Description
40ft High Cube
The 40ft High Cube adds a full extra foot of interior height over the standard 40-footer — 9’6″ exterior, 8’10” of usable interior clearance — making it the go-to choice for taller racking systems, bulkier freight, and virtually every container conversion project (offices, workshops, pop-up retail) where headroom changes what’s possible inside the box.
Buy it New/One-Trip for a like-new shell with full paint and zero structural wear — the standard starting point for conversion builds where cosmetics and a clean substrate matter. Or choose a Used unit, inspected and condition-graded, for meaningful savings when the box is going straight into storage or freight duty rather than a finish-out project.
As one of the highest-volume SKUs in the fleet, 40ft HC units move fast through our depot network — real-time inventory on this page reflects what’s actually sitting in the yard closest to your delivery zip, not a national pool with a multi-week wait.
Technical Specifications
| Exterior Dimensions (L x W x H) | 40’0″ x 8’0″ x 9’6″ (12.19m x 2.44m x 2.90m) |
| Interior Dimensions (L x W x H) | 39’5″ x 7’8″ x 8’10” (12.03m x 2.35m x 2.69m) |
| Door Opening (W x H) | 7’8″ x 8’5″ (2.34m x 2.59m) |
| Tare Weight | 8,598 lbs (3,900 kg) |
| Max Payload Capacity | 58,600 lbs (26,580 kg) |
| Total Cubic Capacity | 2,694 cu ft (76.3 cbm) |
Condition Grading Matrix
| Grade | What It Means | Best For |
|---|---|---|
| New / One-Trip | Single loaded ocean voyage; near-factory cosmetic condition, full paint, tight seals, no dents/rust. | Conversion projects, branded placements, resale — anywhere appearance matters. |
| Used — Cargo Worthy (CW) | Multi-voyage unit, structurally and watertight certified for cargo re-use. Cosmetic wear expected. | Budget-conscious buyers needing shipping-grade integrity. |
| Used — Wind & Watertight (WWT) | Weatherproof, structurally sound for static use; not cargo re-certified. | Lowest-cost option for storage-only use cases. |
Specs may vary slightly by unit — confirmed on your quote.
Site Readiness & Delivery Requirements
- Tilt-bed offload clearance: Minimum 100 ft straight approach, plus overhead clearance of at least 15 ft (the extra foot of container height plus tilt-bed mast angle needs more vertical room than standard-height units).
- Ground surface: Level, compacted, load-rated pad — critical given the taller profile raises the center of gravity during placement.
- Site access checklist:
- Overhead clearance of 15+ ft confirmed along entire delivery path (power lines are the #1 cause of delayed HC deliveries)
- Straight-line approach of 100+ ft or pre-arranged alternate offload
- Surface leveled and rated for point-load at all four corner castings
- If converting on-site, confirm utility stub locations before placement
- Permit/zoning confirmation, especially for conversion or occupied-use projects
Frequently Asked Questions
What’s the delivery radius from the nearest depot?
Delivery radius depends on the depot closest to your zip code — enter your zip on the quote tool for an exact radius and price.
Do you offer depot pickup instead of delivery?
Yes — depot will-call pickup is available and reflected as a lower price at checkout.
Do I need a permit to place a container on my property?
Requirements vary by municipality. Check our permits & zoning guide before your delivery date.
What’s included in the condition inspection/guarantee?
Every unit passes our 12-point structural and watertight inspection before it’s listed, with the results reflected honestly in its condition grade.
What payment terms and methods do you accept?
We accept major credit cards, ACH/wire transfer, and financing through our checkout partners.
Can I customize this container after purchase?
Yes — see our Custom Modifications page for roll-up doors, shelving, electrical, and more.
Reviews
There are no reviews yet.